Deploying LXC devices

LXC is a userspace interface for the Linux kernel containment features. Through a powerful API and simple tools, it lets Linux users easily create and manage system or application containers. LXC devices can run lava tests within a container without disturbing the dispatcher host. The prime advantage of having LXC device in LAVA is the ability to provide a transparent, sandboxed environment with support for different OS types, enabling testing in different platforms.

Prerequisite

Ensure that LXC is installed in your LAVA dispatcher host, if not use the following command to install LXC in Debian:

$ sudo apt install lxc

Refer the following links in order to setup networking for LXC in Debian:

Android testing with LXC support

LXC protocol is used for Android testing use-cases which removes the need for writing complex job definitions using Multinode. This is made possible by adding the usb path of the DUT that is attached to the dispatcher. The device configuration takes a special parameter called device_info which will be used to expose the DUT to LXC for Android testing. The device_info takes a list of dictionaries, where each dictionary value can contain keys such as board_id, usb_vendor_id, usb_product_id.

Examples of device_info configuration are as follows.

Example 1 - Single device with just board_id

{% set device_info = [{'board_id': '0123456789'}] %}

Example 2 - Single device with board_id and usb_vendor_id

{% set device_info = [{'board_id': '0123456789', 'usb_vendor_id': '0451'}] %}

Example 3 - Single device with board_id, usb_vendor_id and usb_product_id

{% set device_info = [{'board_id': '0123456789', 'usb_vendor_id': '0451', 'usb_product_id': 'd109'}] %}

Note

Do not run adb daemon on the dispatcher host, which will grab the DUT and will hinder exposing it to LXC. Similarly, remove fastboot packages from the dispatcher host.

commands:
    connect: telnet localhost 0000
    hard_reset: /usr/bin/pduclient --daemon services --hostname pdu00 --command reboot --port 00
    power_off: /usr/bin/pduclient --daemon services --hostname pdu00 --command off --port 00
    power_on: /usr/bin/pduclient --daemon services --hostname pdu00 --command on --port 00
    pre_power_command: /usr/local/lab-scripts/usb_hub_control -p 0000 -m sync -u 00
device_type: hi6220-hikey
adb_serial_number: 12312BA123B123B1
fastboot_serial_number: 12312BA123B123B1
fastboot_options: ['-S', '256M']
device_info: [{'board_id': '12312BA123B123B1'}]  # It is a list of dictionaries

actions:
  deploy:
    methods:
      lxc:
      fastboot:
    connections:
      lxc:
      serial:
  boot:
    connections:
      lxc:
      serial:
    methods:
      uefi-menu:
        parameters:
          interrupt_prompt: "Android Fastboot mode"
          interrupt_string: 'x'
          item_markup:
            - "["
            - "]"
          item_class: '0-9'
          separator: ' '
          label_class: 'a-zA-Z0-9\s\:'
          bootloader_prompt: 'Start:'
          boot_message: "Booting Linux Kernel..."
          character_delay: 10
        fastboot:
        - select:
            items:
             - 'boot from eMMC'

timeouts:
  actions:
    apply-overlay-image:
      seconds: 120
    umount-retry:
      seconds: 45
    lava-test-shell:
      seconds: 600
    power_off:
      seconds: 10

Arbitrary external devices needing LXC support

Some test devices have attached hardware which needs to be visible from the LXC during the time that the test job is running.

  • If the attached device re-enumerates on the worker each time that the DUT is rebooted then device_info can be used.

  • More commonly, the attached device is independent of the DUT and is accessible to the worker even when the DUT is powered off. These attached devices need to use static_info.

    • Static USB devices (using board_id, usb_vendor_id or usb_product_id) will be added to the LXC at the start of the test job, including associated /dev/ nodes like /dev/tty* or /dev/serial/by-id/ etc. Test writers will need to locate the correct device by inspecting paths like /dev/serial/by-id/.

    • Other static devices which are accessible over the network can be made available to a test shell in the LXC through lava test shell helpers.

See also

Commands

One example is an energy probe, which may be measuring a single DUT whilst being connected to the worker as a USB or network device.

For a USB probe, the id of that USB device needs to be in the static_info of the DUT so that the test shell running in the LXC can control the probe.

For a network attached probe, the IP address of the probe and the channel which the probe uses for this specific DUT need to be in the static_info.

USB attached devices

The value for board_id in the static_info is what shows up in pyudev bindings as the ID_SERIAL_SHORT. This is typically the SerialNumber reported by dmesg but it is worth checking as the precise syntax does matter and can differ between pyudev and dmesg:

>>> import pyudev
>>> context = pyudev.Context()
>>> [ device.get('ID_SERIAL_SHORT') for device in context.list_devices(subsystem='usb')]
[u'0000:00:1a.0', None, None, None, None, u'889FFAE94013', None, None, None, None,
None, u'FTGNRL22', None, None, None, u'S_NO62200001', None, None, None, None,
None, None, None, None, None, u'0000:00:1d.0', None, None, None]
>>>

For usb_vendor_id, the corresponding pyudev key is ID_VENDOR_ID. For usb_product_id, the corresponding pyudev key is ID_MODEL_ID.

The keys given in the dictionary are not arbitrary and follow the same rules as for Android devices:

[{'board_id': 'S_NO62200001'}]

Caution

Ensure that the static_info relates to a USB device which is attached to the same worker as the DUT but is not a DUT itself.

If using multiple keys for the same device_info, ensure that the key value pairs are in a single dictionary within the list of dictionaries:

{% set static_info = [{'board_id': '0123456789'}, {'board_id': 'adsd0978775', 'usb_vendor_id': 'ACME54321'}] %}

Note

Devices which include a forward slash / in the serial number will have that replaced by an underscore when processed through pyudev. e.g.:

udev: ATTRS{serial}=="S/NO44440001"
pydev: S_NO44440001
static_info: {% set static_info = [{'board_id': 'S_NO44440001'}] %}

Note

LAVA instances running systemd newer than build 232 (e.g. Buster) need to allow scripts called by udev rules to access the network to get proper logging of the addition of dynamic USB devices to the LXC. LAVA achieves this by providing an override file for the systemd-udev.service` in ``/etc/systemd/system/systemd-udevd.service.d/override.conf. The actual network change is not visible in the systemd show support for the udev service, so the override also updates the unit description to make it obvious. When this override is in effect, you will be able to see the change:

$ sudo systemctl status udev
systemd-udevd.service - udev Kernel Device Manager (LAVA)
Loaded: loaded (/lib/systemd/system/systemd-udevd.service; static; vendor preset: enabled)
Drop-In: /etc/systemd/system/systemd-udevd.service.d
         -override.conf

Configuration

Persistent Containers

A test job can request a persistent container which will not get destroyed after the test job is complete. This allows the container to be reused for subsequent test jobs. This is useful when users want to setup some software on a container and use it for subsequent test jobs without re-creating the setup every time, which may prove time consuming.

In such a case the admins can choose to switch the container creation path from the default i.e., /var/lib/lxc to some other path, which could be a larger partition mounted on the dispatcher to give more space for such persistent container users. To set a different container creation path on a per dispatcher basis lxc_path key is used in the dispatcher configuration as described in Extra dispatcher configuration

Once the lxc_path key is set in dispatcher configuration, both persistent and non-persistent containers will get created in this path.

Note

LAVA does not have a mechanism to limit the amount of disk space such persistent containers could use. Hence, administrators should setup some kind of external monitoring in order to watch the size of these persistent containers and free space whenever required or destroy unused persistent containers.

Unprivileged containers as root

This is the recommended configuration for running your LXC devices within a LAVA dispatcher, provided your container does not access any devices attached to the host. In this configuration the containers will run as unprivileged user started by root user.

Allocate additional uids and gids to root:

$ sudo usermod --add-subuids 100000-165536 root
$ sudo usermod --add-subgids 100000-165536 root

Then edit /etc/lxc/default.conf and append lxc.uidmap entry like below:

lxc.id_map = u 0 100000 65536
lxc.id_map = g 0 100000 65536

With the above in place any container created as root will be an unprivileged container.

Warning

Do not use unprivileged containers when your container has to interact with a DUT that is attached to the host machine.

Note

To apply configurations system wide for all LXC devices attached to the dispatcher use /etc/lxc/default.conf file.

Other resources

For advanced LXC configurations and usage refer the following links: